Best Fire Barrier Foam per ASTM-E119 Test

PRODUCTS   SERVICES APPLICATIONS CONTACT   

Recent News
February, 2023
(by Advanced Market Analysis Research & Media LLP in evaluating market size, trend, and forecast for global foamed concrete market to 2027)

"Allied Foam Tech was selected as the key player in US for the infrastructure development in the global foam concrete market."

1. Allied Foam Tech has been awarded by USCA as the best chem machinery other manufacturer in Montgomeryville, Pennsylvania in 2015, 2014, 2013, and 2011-2009.

2. Allied Foam Tech was awarded a 2016 Gold Medal in Material Science and a 2014 Silver Medal in Applied Technology from EDISON AWARDS


Allied fire barrier foam has the highest compressive and bending strengths
vs autoclaved & cast-in-place foam cement
Cement Composite Cure Condition Density Compr. Strength Bending Strength
AFT Fire Barrier Foam I RT 35 pcf 900 - 1,000 psi 370 - 500 psi
AFT Fire Barrier Foam II RT 35 pcf 650 - 750 psi 300-350 psi
AFT Portland Cem I/II RT 35 pcf 400 - 450 psi 100-200 psi
Autoclaved Concrete Autoclaving 35 pcf 600 - 700 psi 100 psi(?)

(b>
Allied fire barrier foam has the highest fire rating per ASTM-E-119 Test
against fire rated X-gypsum boards
fire barrier and fire barrier foam

(b>
                          Allied fire barrier foam has twice or better fire ratings per ASTM-E-119 Test
             over all fire rated intumescent coatings
fire barrier, fire barrier foam, E-119

OTHER HIGHLIGHTS

HIGHLIGHT - JANUARY, 2016 (World Trade Center Phase II Project, New York)

Versatile Compact Foam Cement Mixing Pumping Setup - High Mobility with Good Output

World Trade Center, New York - Phase I (December, 2014) & Phase II (January, 2016) Geotech Fill Projects

fire rated, fire barrier, fire barrier foam

foam concrete, foam cement,flexible concrete,foamed concrete

fire rated, fire barrier, fire barrier foam

9/11 Memorial Museum (upper view)

Allied Geotech Setup - Museum in the back Allied Foam Liquid Tanks and Foamer Setup

fire rated, fire barrier, fire barrier foam

foam concrete, foam cement,flexible concrete,foamed concrete

fire rated, fire barrier, fire barrier foam

Two Mixer/Pumpers on Either Side of Allied Foamer Two Pumping Hoses Going Down Geotech Fill for WTC Subway Stabilization
1/3 Yard Mobile Foam Cement Mixer/Pumper  above or Other Conventional Grout Mixer/Pumper. Adding Allied Foam to 1/3 Yard Mixer on the left. Grout Pumped through Hose to Indoor Site. Allied Foam Cement Grout over Unprimed Concrete Base. Allied Foam Cement Grout - Screed to Level. Load-bearing Topping Applied over 30 pcf Allied Foam Cement Grout.
Landscape Architechture on the Roof - An application with allied low slump foam cement
Harvard University - NorthWest Science Building, 530,000 ft2 multidisciplinary research facility
 The World's 1st Low Slump Geotechnical Roof Fill used Allied's Cement Composite Design, Foam Products & Machinery.

The award winning facility places more than half the total square footage of the facility below grade, and incorporates three functioning green roofs. The south facade of the Northwest Science Building defines a new South Yard, equipped with low landscape furniture. The yard is a green roof over extensive basement levels, with skylights bringing daylight into the underground areas.

Landscape Design Landscape on top of the Foam Cement-soil structure Recreation Area under the Foam Cement Composite Night View around the Landscape
fire rated, fire barrier, fire barrier foam flexible concrete,foam concrete,foam cement,lightweight concrete fire rated, fire barrier, fire barrier foam flexible concrete,foam concrete,foam cement,lightweight concrete
(Pre-project mockup work by Allied Foam Tech is shown below)
flexible concrete,foam concrete,foam cement,lightweight concrete flexible concrete,foam concrete,foam cement,lightweight concrete flexible concrete,foam concrete,foam cement,lightweight concrete flexible concrete,foam concrete,foam cement,lightweight concrete
Mixing & Pumping of High Applying of High Slump Loss Finished Foamed Cement Crown Cross-section of
Slump Loss Foam Cement Foam Cement on 1 Vertical/4 Horizontal Slope On Highly Sloped Geofoam Landscape after ~ 1 year
 

Foamed Concrete and Lightweight Concrete - With densities from over 1,450 kg/m3 (90 pcf) to as low as 48 kg/m3 (3 pcf) for geotechnical engineering & landscape architecture, lightweight concrete roof deck, lightweight wall and floor  panels partitions lightweight concrete blocks insulative cinder block inserts.

Fleixible Foam Cement Composites High flexural strength, good Mandrel bending behavior without cracking, good adhesion, exterior durability and excellent water resistance.

Landfill Cover, Odor Control & Site Remediation - Allied pervious & non-pervious foamed cement are capable for waste encapsulation,       immobilization, soil stabilization and leachate filtration. Allied long lasting foam, applied as a surface cover on landfill sites and effluent ponds and lagoons, will effectively suppress noxious odors, vapors, litter and vectors, avoiding serious environmental issues.

Lightweight Ceramics & Foam Ceramics - with densities as low as 23 kg/m3 (1.5 pcf)  for fabrication of insulative and high temperature resistant ceramic foams.

Pervious Foam Cement & Acoustic Foam Cement - Allied chemically engineered open and closed pore properties within their cell structure are very  similar to that of urethane and polystyrene foams, but without their associated poor fire resistance, yet with outdoor durability and great cost advantage.

 Insulative Firebricks -with excellent strength and thermal shock resistance for fabrication of  durable firebricks used as high performance insulative     materials for kilns and incinerators.

Geopolymer Foam - Flexible and very light (< 1.5 pcf or 24 kg/m3). Various geopolymer foam composites can achieve insulative value R > 3.8 per inch       and fire resistance.

Foam Coatings & Binders - Using a foamable mixture as an expansion agent permits application of a controlled film thickness with improved resin distribution and penetration into the fabric fibers. Foam textile binders dry quickly without causing fiber distortion.

Foamed Adhesives - Using adhesives, based on Allied's foam system, will reduce adhesive consumption and prevent adhesive absorption by porous substrates. 

Firefighting Foam -Specially formulated foam from Allied can be used as long duration fire fighting barriers for  the containment of forest fires.  

Click here if interested in our foam & foam generator

 

Our Mission
At Allied we are committed to the continuing development of versatile and highly stable aqueous foam and systems with a wide range of properties and applications that meet the specific needs of our customers in the various industrial sectors.
Technology

Allied Foam Tech has developed a universal foam technology for a wide range of industrial  and environmental applications. The excellent stability and dynamic nature of Allied's aqueous foams make them ideal for use in  reducing the weight of cement/concrete, ceramics, firebricks, adhesives, coatings, and binders. Foam stability derived from Allied's many foam systems usually outranks that of any other existing technologies available in today�s marketplace.

The AFT series of foam agents, using compressed air and Allied foam generating equipment, generates very fine and stable foams. They are used for the manufacture of  lightweight (or foamed) concrete, lightweight ceramics, insulative firebricks, alternative landfill cover, foam coatings, foam adhesives, long-duration firefighting foams and other uses. Substrates such as cement, concrete, coating formulations or others that incorporate Allied's foam products usually exhibit reduced weight with improved workability, insulation value, sound proofness, and expanded applications.

Allied  has also developed various models of compact and versatile foam generating equipment for production or field application  that can be manually or remotely controlled.

Postal address:
Allied Foam Tech Corp.
146 Keystone Drive 
Montgomeryville, Pa 18936, USA
(For more detailed contact info please see CONTACT page)